Jonard Fiber Optic Stripping Tools & Cable Slitters

Jonard Fiber Optic Tools are made of the highest quality materials, offer superior performance and are the most durable in the industry.
Jonard Tools are user friendly and are RoHS and REACH compliant.

Contact FiberOptic Resale Button

Gray Line Divider

JIC-175 Ergonmic Fiber Optic Stripper
Buy Now $28.40

Jonard Fiber Optic Stripper JIC-175
Used for stripping the 250 micron coating from the 125 micron optical fiber. Preset at the factory so no adjustments are necessary, this unique Ergonomic design prevents nicks or scratches on the optical fiber. The stripping blades are ground and hardened for durability and long life. Handle is made of TPR (Thermoplastic Rubber).

JIC-375 Fiber Optic Stripper 3 Hole
Buy Now $28.40

Jonard Fiber Optic Stripper JIC-375

Three hole Fiber Optic Stripper model performs all common fiber stripping functions. The first hole of this Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the 125 micron glass fiber without nicks or scratches. Handle is made of TPR (Thermoplastic Rubber)

JIC-125 Fiber Optic Stripper
Buy Now $27.35

Jonard Fiber Optic Stripper JIC-125
The Fiber Optic Stripper is used for stripping 250 micron buffer coating from 125 micron optical fiber. Preset at the factory so no adjustments are necessary. Unique design prevents nicks or scratches on the optical fiber plus blades are ground and hardened for long life.


JIC-1022 Wire Stripper
Buy Now $9.70

Jonard Fiber Optic Stripper JIC-1022
The JIC-1022 Wire Stripper and Cutter is designed to strip and cut the most commonly used stranded and single wire gauges 10 to 22 AWG (2.60-0.64 mm) and 2-3 mm fiber jackets. Other features include a coil spring opening to reduce fatigue, wire looping, bending holes conveniently located, black oxide finish, locking mechanism, and cutting surfaces that are hardened, tempered and ground for superior performance.

JIC-4366 - Cable Stripper & Ring Tool
Buy Now $62.35

Jonard JIC-4366 Stripper
This Cable Sheath Stripper is used to ring-cut many types of tight buffer, loose tube buffer, breakout cables and other types of jacketed fiber cables. A slitting blade is built into the tool and can be used to slit open the cable sheath if needed. Depth of the cut has two adjustments for .018" or .031" thick plastic, rubber or fabric insulation, and can handle cable diameters from 1/8" to 3/8". One spare blade of each style is included with the tool. Also known as CT2860.

JIC-63050 High Leverage Cable Cutter
Buy Now $17.65

Jonard JIC-63050

High leverage design for superior cutting ability. Designed with a shear-type jaw for cutting aluminum and soft copper. Not for use on steel or ACSR type cables. Cuts up to 100-pair cables (24 AWG). Red handle High leverage design for superior cutting ability. Designed with a shear-type jaw for cutting aluminum and soft copper. Not for use on steel or ACSR type cables. Cuts up to 100-pair cables (24 AWG). Red handle 9 1/2" long.


FDS-312 - Fiber Drop Cable Stripper

Jonard FDS 312 Fiber Drop Cable Stripper

Designed to strip FTTH drop cables sized 3.1 mm by 2.0 mm, this drop cable stripper strips the outer jacket of drop cables and cuts the strength members to expose the fiber inside.

MS-6 - Mid Span Slitter
Buy Now $70.85

Jonard Tools MS-6 Slitter
Designed to provide easy access to optical fibers in loose buffer tubes 1.2mm - 3.3 mm diameter. With 6 precision grooves buffer tube slitting is done without damage to the fiber. The blades are replaceable.

FOD-2000 Drop Cable Slitter
Buy Now $51.00

Jonard Tools FOD-2000 Slitter
The FOD-2000 Fiber Optic Drop Cable Slitter is a patented tool that simplifies the slitting of drop cable jackets at the end of the cable or mid-span and was developed specifically for FTTH technicians working with flat fiber drop cables. For flat cables, where the width is .305"-.350" and the height is .155"-.185". These are the dimensions of a typical Corning SST-Drop flat cable with a jacket thickness of 0.03-0.04 inches. The tool will work on other cables with similar dimensions.

MS-26 Large Mid Span Slitter
Buy Now $79.60 

Jonard Tools MS-26 Slitter
The Jonard Tools patent pending MS-26 Mid Span Slitter is designed to open fiber jackets and loose buffer tubes to provide easy fiber access. The MS-26 is designed to work on cables or buffer tubes ranging in size from 2.9mm to 6.8mm in diameter. It's sleek ergonomic design allows you to open a jacket or buffer tube without damaging the fiber and features a replaceable cartridge blade set - part number MSB-2968.


Jonard RCS-25 Ratcheting Cable Slitter
Buy Now $150.00

Jonard Tools RCS-250 Ratchiting Cable Slitter

Jonard RCS-25 Ratcheting Cable Slitter Features:
Slits and rings PVC, PE, rubber, and other cable jacket materials. Will work on small cables as well as cables larger than 25mm. Designed with reversible double-ended replaceable blade with adjustable cutting depth 0-5mm for each unique cable application. 10/20/30mm scaled on tool for slitting length reference. For midspan or end cable slit and ring applications.

Jonard JIC-200 200 Micron Cable Stripper Buy Now $36.25

Jonard JIC-200 Cable Stripper
Used for stripping the 200 micron coating from the 125 micron optical fiber. Preset at the factory so no adjustments are necessary, this unique Ergonomic design prevents nicks or scratches on the optical fiber. The stripping blades are ground and hardened for durability and long life. Handle is made of TPR (Thermoplastic Rubber).

RST-8514 - Riser Slitting Tool
Buy Now $97.35

Jonard Slitter RST-8514

The RST-8514 is a mid-span slitting tool used to create access in round FTTH riser cables as well as microducts. It works with 8.5mm to 14mm round cables.

Easy to use:
Press the tool against the cable to be accessed.
Grip the tool and the cable firmly in one hand and pull.

Blade is easily replaced. Order replacement part number RST-RB25 for package of 25 replacement blades.


EZSR-23 Fiber Slit & Ring Tool

Jonard EZSR-23 Fiber Slit & Ring Tool
The EZSR-23 Fiber Slit & Ring Tool has been specially designed to prepare 2 mm and 3 mm fiber optic cables for connecting with Fitel EZ!Fuse™ SC & LC Splice-On Connectors. This tool saves time and makes the connecting process extremely easy by having a ringing dial and slitting channel with preset lengths.

We Offer Repair & Calibration Services

At FiberOptic Resale Corp we have a broad range of expertise on the most popular equipment saving you time, money and the inconvenience of sending your fusion splicers & cleavers to multiple OEMs. Let us keep your fiber optic equipment operating like new.

Customized fusion splicer repair services.

Our factory trained techs have a broad range of experience which allows them to diagnose and repair older splicers as well as the newer more difficult to troubleshoot fusion splicers and cleavers.
We Offer

  • Technical diagnosis and estimation of repairs
  • Detailed documentation on work completed
  • Pre & post sales technical support

Request Services From FiberOptic Resale Transparent

English English Spanish Spanish